I am installing my Yale siren-based alarm, but I can’t disable the siren tamper. Why is this?
Your Key Pad may not be programmed in correctly to the siren. In order to programme the keypad into the siren, the siren will need to be reset. Please see the steps below for more information and instructions:
Step 1
Remove the front cover of the siren and turn it to off using the on/off switch.

Step 2
Press the learn button twice to remove the residual power.

Step 3
Then move switch 1 and 4 to the ON position.

Step 4
Then turn the power on and it will beep and flash.

Step 5
Switch 1,2 ,3 - to the OFF position. Switch 4 - to the ON position.

Step 6
To reprogram the keypad press the learn button on the siren for 1 second and you will get a beep and a flash.

Step 7
Press all the learn buttons on all the devices once to learn them back in again and you will hear a beep every time they are learnt back in.

Step 8
To learn the keypad back in press button A and add pincode.

Step 9
Then button A and the number 8.

Step 10
Then button A and number 1, then press disarm twice and press the learn button on the siren. Now disable the tamper then fit the siren back on the wall .
