What does the light activity on the Keypad mean?
The keypad displays the following light activity:
Slow pulsing red LED: Setup mode These last for 30 minutes and then turn off if the keypad setup is incomplete. To put the keypad in setup mode again, remove and reinsert one battery.
Pulsing LEDs after code entry: Establishing Bluetooth Connection. This lasts for 30 seconds. If the keypad is unable to establish a Bluetooth connection with the lock, the LEDs will stop pulsing and nothing else happens.
Rapid LED flashes: Batteries are low. If the batteries in the Keypad are running low on power and need to be replaced, the entire keypad will flash red rapidly every 5 seconds. The LEDs will stop pulsing once the batteries have been replaced with new ones.