Dog
Showing articles 1 - 10 of 15
Will my pet Dog or Cat trigger my alarm?
Pets can set off the alarm when detected by a PIR motion detector. For small pets, under 27kg a pet-friendly PIR motion detector can be used which can be adjusted to suit your requirements. For rooms that need to be
I want to part arm my IA Alarm system, what do I set the sensors to?
The sensors must be programmed as ‘Home Omit’, to exclude them when in the ‘Home’ arm mode. If you have already configured your alarm, you can edit the settings of each device in the ‘Edit Devices’ section of the programme
Should the Red light flash on my PIR?
The Red light will flash on initialisation when the battery tab is removed, otherwise, it should not.
Can I make my system pet friendly?
Pet PIRs are available from the Yale Store website and other online retailers.
Should the Red light flash on my PIR?
The Red light will flash on initialisation when the battery tab is removed, otherwise, it should not.
My PIR is not responding when I arm the system?
The PIR goes into sleep mode for two minutes. Please vacate the area covered by the PIR for a full 2 minutes before testing.
Why won’t my PIR Image Camera learn into my Smart Home Alarm System?
This is because the PIR Image camera isn’t in the setting mode. Please remove the batteries and wait for 1 minute. Re-insert the batteries again and put the hub into learn mode. Press and hold the camera PIR learn button
To what height should I position my PIRs for optimum performance?
The best height is between 1.8m and 2.1m above floor level, situated in the corner of the room.
What is the maximum movement detection range of a PIR?
The PIRs will respond to movement of up to 12 metres away and 110 degrees when placed in the corner of a room, movement is detected from floor to ceiling.