How do I carry out a factory reset?
Please follow the steps below to reset the lock, making sure that you re install the lock onto the door after resetting it.
Step 1
Remove Batteries out of the lock (Module too if one is installed)

Step 2
Remove Batteries out of the lock (Module too if one is installed)

Step 3
Un-screw the top 2 screws, bottom 2 and then screw in the battery compartment

Step 4
Carefully remove the cable from the lock

Step 5
Hold the R Button under the radio cover (Where Module was installed)

Step 6
Whist holding the R Button insert the batteries into the lock, Keeping hold of the R button until the lock starts to beep continuously
