How do I add more users to control the alarm?
All the devices in your Kit are already pre-paired with your Smart Hub. In case you have bought an additional Key Pad, please follow the instructions below to add it to your system
Key Pad Initialisation
If you are adding the Key Pad as an additional device to your alarm system, you need to
initialise the device first.
- Press the ‘Panic button A’ key followed by factory default Key Pad code ‘0000’ (this is different to
your Control Panel PIN) - Press the ‘Panic button A’ key followed by the ‘7’ key to set the Key Pad into Control Panel system
mode (also known as slave mode) - The LED will now flash slowly indicating it is in test (programming) mode.
- Press the ‘Panic button A’ key followed by the ‘7’ key to set the Key Pad into Control Panel system
- Quit test mode by pressing the disarm key twice. The Key Pad code and mode setting have been completed. The Key Pad will now use the same PIN that is set for the Control Panel.
Step 1
Step 2
To pair the device, put your panel in paring mode then press 8 and 9 key together to pair the keypad to your system
