I have a 30 second beep and an amber light on my control unit
Please check the fault log as follows, press the PR button enter your PIN, then press tick, press tick on fault log and then use the up and down arrows to see what the log shows.
Press PR enter your pincode and press tick.
You should see fault log on the screen, press tick.
Use the up and down arrows to see what it listed on there, fix the problem i.e. change the batteries or check the tamper and to clear the fault log down, press the circle arrow once and the screen will say clear fault display and then press tick.
If it’s cleared the screen will say walk test and if it hasn’t cleared it will still say fault log on the screen.